Posts for tag: dental implants

By Heritage Grove Family Dental
March 15, 2016
Category: Dental Procedures
NewFrontTeethforaTeenagedDavidDuchovny

In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?

“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.

How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.

With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.

In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.

While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.

Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”

By Heritage Grove Family Dental
February 06, 2016
Category: Dental Procedures
Tags: dental implants  
AttentiontoDetailCrucialtoaBeautifulSmileSupportedbyDentalImplants

Installing dental implants involves more than the mechanics of placing them into the jawbone. Ultimate success — a natural and beautiful smile — requires painstaking attention to detail and artistry.

Here are a few of the factors we must consider to achieve a smile with dental implants you’ll be proud to display.

The amount of available bone. For the permanent crown to appear natural, it’s crucial to position the implant precisely. To achieve this precision requires an adequate amount of bone to be present. Unfortunately, bone loss is quite common after tooth loss; to minimize this we place bone grafts in the empty socket if at all possible after extraction to encourage bone growth. It’s also possible in some cases to perform bone grafting surgery before implants to build up bone volume.

Your genetic gum tissue type. There are basically two types of gum tissue people are born with: thin or thick. Thin tissues are more subject to wear, difficult to work with during surgery and can make it difficult to hide the metal components of an implant. Thicker tissues are easier to work with, but can have a tendency to overgrow.

Achieving a natural “emergence profile.” To look natural, the implant crown must appear to seamlessly emerge from the surrounding gum tissue. To achieve this, we must carefully plan and place the implant in the precise location in the bone, taking into account the implant shape and how far it should be placed within the bone to match the position and height of adjacent teeth and gum tissues.

Blending color shades with adjacent natural teeth. When it comes to color, everyone has subtle differences in tooth shades and hues. In fact, there are slight color variations within individual teeth, from the root to the tip of the crown. To make sure the implant blends in with adjacent teeth, it’s important to match the color incorporated into the porcelain crown with the natural crowns beside them.

These and other factors require both technical expertise and a sense of artistry. Carefully considering all of them will help ensure your dental implants result in the smile you want.

If you would like more information on smile transformations with dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Matching Teeth & Implants.”

By Heritage Grove Family Dental
January 07, 2016
Category: Dental Procedures
Tags: dental implants   dentures  
ChangesinBoneStructurecanAffectDentureFit

It’s a common problem for denture wearers: after years of a comfortable fit, your dentures now seem to be uncomfortably loose. The reason, though, may have more to do with bone loss than the dentures.

Bone is a living tissue with a life cycle — it forms, it ages, and it eventually dies and dissolves (resorbs). It’s replaced with new bone and the cycle repeats. Additionally, the forces generated when we bite or chew are transmitted from the teeth to the jaw, which helps stimulate new bone growth. When the natural teeth are missing, however, the bone no longer receives this stimulus. Resorbed bone isn’t replaced at a healthy rate, which leads over time to bone loss.

Denture construction can also contribute to bone loss. The denture palate rests for support on the bony ridges that once held the teeth. Over time the compressive forces of the dentures apply damages and reduces the volume of gum tissue and eventually does the same to the bone. Combining all these factors, the reduced gum and bone volume will eventually alter the denture fit.

There are a few alternatives for correcting loose dentures. One is to reline them with new plastic, as either a temporary fix performed during an office visit or a more permanent relining that requires sending your dentures to a dental lab. Depending on the rate of bone loss, a patient could go through several denture relinings to accommodate ongoing changes in the jaw. At some point, though, it may be necessary to create a new set of dentures.

A third alternative that’s becoming increasingly useful is to incorporate dental implants into the denture design. Implants can of course be used to replace individual teeth, but a few strategically placed implants (usually of smaller dimension) can serve as a support platform for a removable denture. This relieves some of the compression force of a traditionally worn denture and can slow bone loss.

If you’re having problems with your denture fit, call us for an appointment. We’ll help you decide on the best alternative to improving the fit and making your dentures more comfortable and secure.

If you would like more information on refitting loose dentures, please contact us today to schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Loose Dentures.”

By Heritage Grove Family Dental
October 16, 2015
Category: Dental Procedures
Tags: dental implants  
ImplantPlacementintheSmileZoneRequiresExtraAttention

Dental implants are popular with both patients and dentists for their durability and likeness to natural teeth. That natural look, though, can be difficult to attain, especially in what’s known as the “smile zone” — the area of the mouth where teeth are most visible when you smile.

Our biggest concern is the upper front teeth, where the gums are most visible, especially if you smile widely. It takes considerable skill, experience and artistry to position implants in this area so that they appear to naturally emerge from the gums and blend well with other teeth.

To obtain that natural look, we must first assess whether or not there’s enough bone present, which tends to dissolve (resorb) when a tooth is missing, to sufficiently anchor the implant in the right position. There also needs to be sufficient bone around adjacent teeth to support the tiny triangles of gum tissue between teeth called papillae. Without the papillae an unattractive black hole may result between the implant and an adjacent tooth or implant.

Another factor we must consider is the type of gum tissue you have. Everyone generally inherits one of two types of tissue from their parents: thin or thick. The type you have can influence the way the implant appears to emerge from the gums. If you have thick gums, they’re easier to work with and can cover more of the implant. Thinner tissues aren’t quite as easy and are less forgiving if an implant isn’t placed as precisely as possible.

In recent years, improvements in implant design have sought to provide greater stability around bone and gum tissues to offset some of the issues we’ve mentioned. A variation on the design of the top of the implant (where the crown is attached) changes the direction of growth for gum tissues from a horizontal orientation to a vertical one, which can help with the final appearance.

The first step, if you’re considering dental implants for a tooth in the smile zone, is to visit us for a complete examination to see if any of these factors may have an impact on your situation. We can then advise you on the best course of action to achieve the most attractive smile possible.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Implant Aesthetics.”